Ripley MILLER DLS 655, Руководство пользователя

Страница: 6 / 10

Page 6
DLS655 User Guide
Modes
Press the OK/Menu button to access the Main Menu
Use the Up/Down arrow buttons to move the cursor to the option you would like to explore. Press the
Left arrow button to go back to the Main screen. Press the OK/Menu button or the Right arrow button
to select an option.
Press the OK or Right arrow button to select the Mode menu.
The Mode menu shows all modulation modes the DLS 655 can
transmit.
CW indicates the continuous wave mode. This mode contains
no modulation. CW mode can be used with any optical power
meter.
Wave-ID indicates the automated wavelength identification
mode. In this mode, the DLS 655 wavelength information is
transmitted and can be recognized by the RP 560-series of
optical power meters. The RP 560 will automatically switch to
measure the wavelength being transmitted.
2kHz, 1kHz, and 270Hz are all modulated signals that may be
needed for continuity testing on fiber. Any Ripley power meter
will identify a 2kHz tone, but the 1kHz and 270Hz options are
only compatible with the RP 560-series.
The currently-selected option is highlighted.
Main Menu
Mode
Backlight
Mode
CW
Wave-ID
2kHz
1kHz
270Hz