Riotoro CR488, Руководство пользователя

Страница: 17 / 30

Position the fan hub to allow facilitate good
cable management and allows you easy
access to the controller.
To connect fans directly to the motherboard
always make sure you use the correct header;
12V fan to 12V header / 5V fan to 5V header.
Note: The fans included are NON-RGB fans, DO NOT connect to the RGB header. To avoid issues follow the instructions
provided by the fan, controller and motherboard manufacturer. Connecting a NON-RGB RIOTORO FAN will potentially
set the RGB lightning out of sync, connect any non RGB fan or third party fan to the motherboard fan headers if needed.
1 2
Connect the fans directly to the motherboard using the appropriate fan header.
Alternatively, connect the fans to an RGB hub and controller (make sure they
are connected to the PSU).
ATTACHING THE CASE FAN CABLES
Chapter 5 16
MID TOWER CASE CR488