Riotoro CR100TG, Руководство пользователя

Страница: 18 / 34

Chapter 2
DO NOT attach the logo cable to the motherboard.
Note: The front panel logo is powered by 5V. It is connected to the RGB controller connector marked 5V.
Motherboards with RGB lighting features allow you to control the case
lighting from its software, just make sure it has RGB 4-pin connectors
with the pinout 12V-G-R-B.
Check your RGB motherboards markings to find the
12V pin and connect the case’s RGB cable or LED
strip cable to the motherboard RGB header.
Detach the case’s RGB cable (12 volt RGB cable)
from the RGB controller
1 2
LIGHTING CONTROL WITH RGB MOTHERBOARDS
CR100TG MID TOWER CASE
17