5
Transmission Speed
Transmission speed is dependent on your device. In order not
to lose data, please choose the correct speed. Middle-speed is
the Default.
Demo
%B%T%H
High-speed transmission
(for HID, SPP)
Demo
.
Middle-speed transmission
(for HID only, HID Default)
Demo
%B%T%L
Slow-speed transmission
(for HID/SPP, SPP Default)
Demo
.
Ultra Slow-speed 1 transmission
(for HID only)
Demo
.
Ultra Slow-speed 2 transmission
(for HID only)
Demo
.
Ultra Slow-speed 3 transmission
(for HID only)
Power-saving Mode
Demo
%P%D%T00
Power-saving mode OFF
Demo
%P%D%T01
Power-saving mode ON (Default):
Enter power-saving mode after one
minute inactivity. This function
conserves battery power. When you
press the "SCAN/Power ON" button, it
will wake up and begin to scan.
*
When charging, the scanner will not enter power-saving mode
automatically.
Battery information
Demo
.
When you scan this setting
code, scanner will output the battery
information to device.
Demo
.
Output battery information
automatically – Enable
Will send data to device
every 30 seconds.
Demo
.
Output battery information
automatically – Disable.
The output format of battery information is as below:
For example: %^4^%
%^NUMBER^% Number is from 0~4.
4 means 80%~100%
3 means 55%~80%
2 means 30%~55%
1 means 10%~30%
0 means under 10% --
When output reads “0”, it means low
battery power and device should be charged immediately.
1D Symbologies – 1
ENABLE
UPC-A/E
DISABLE
@MENU_OPTO@ZZ@R1@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@X4B@ZZ@OTPO_UNEM@
ENABLE
JAN/EAN
DISABLE
@MENU_OPTO@ZZ@R4@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@X4E@ZZ@OTPO_UNEM@
ENABLE
Code 39
DISABLE
@MENU_OPTO@ZZ@B2@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@VB@ZZ@OTPO_UNEM@
ENABLE
Tri-optic
DISABLE
@MENU_OPTO@ZZ@JZ@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@DDJ@ZZ@OTPO_UNEM@
ENABLE
CODE 93
DISABLE
@MENU_OPTO@ZZ@B5@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@VD@ZZ@OTPO_UNEM@
ENABLE
CODE 11
DISABLE
@MENU_OPTO@ZZ@BLC@ZZ@OTPO_UNEM@
@MENU_OPTO@ZZ@BLA@ZZ@OTPO_UNEM@
