Rion UV-15, Инструкция по эксплуатации, Страница: 3 / 72

i
Organization of this manual
This manual describes the features, operation, and other aspects of the Vibration
Meter Unit UV-15. If the unit is used together with other equipment to confi gure a
measurement system, consult the documentation of all other components as well.
The section starting on page iii contains important information about safety. Be
sure to read and observe these precautions in full.
This manual contains the following sections.
Outline
Gives basic information about the unit and contains a block diagram.
Names of Parts and Functions
Briefl y identifi es and explains the front panel controls, rear panel connec-
tors and all other parts of the unit.
Linking
Explains how to confi gure multiple units as a system.
Power Supply Connection
Explains how to make connections for powering the unit.
Accelerometer Selection and Connection
Explains the types of accelerometers that can be used, how to connect them,
and how to set them up for measurement.
Output Connections
Explains how to use the output connectors on the rear panel.
Operation Modes
Explains the operation modes necessary for measurement, including input
mode, measurement mode, and calibration mode (Output CAL).