![Rion NC-75 Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/rion/nc-75/nc-75_instruction-manual_1463507026.webp)
14
Calibration
5. Set the power switch of the NC-75
to ON.
- If the battery voltage of the NC-75
is normal, the LED lights up.
- If the voltage is too low, the LED
fl ashes. In such a case, replace
both batteries with fresh ones.
- If the batteries are totally exhausted, the LED will not light at all,
power is automatically shut off. The batteries must be replaced
immediately.
Important
While the LED is fl ashing, correct calibration may
not be possible. There also is the possibility that the
power may be shut off automatically during a calibration.
Replacing the batteries as early as possible is therefore
recommended.
POWER switch
LED
Содержание NC-75
Страница 2: ......
Страница 45: ...33 Specifications Unit mm Dimensional Drawings 70 77 42...
Страница 46: ...No 61932 17 11...