10
SALON LASER TWEEZER
™
stEp 9
FULLy press the button on the wand
for treatment.
The white light will go out and the red
laser will be visible. you will hear a
series of beeps.
Note:
Do NOT move the wand during
treatment.
stEp 10
When treatment ceases the amber light
will come back on. both skin sensors
must be removed briefly from the skin
before treating the next hair. Return to
Step 8 for your next treatment.
AFtER UsE
Turn the key anticlockwise to the OFF
position to lock. Remove and store the
key in a safe place away from children.
Notes:
• You may feel a ‘pin prick’ sensation during treatment,
however, most people do not feel anything.
• Sometimes you may smell faint burning or even see a
very, small line of smoke as the hair is treated.
• Successfully treated hairs do not always fall out
immediately, but are shed over time as they are
released from the hair follicle; light rubbing can
encourage this.
• If no buttons are pressed after 20 minutes the unit
will enter energy saving mode. The orange light will
flash and power level 1 will remain on. To restart, turn
the key off and back on again and return to Step 4 of
‘Instructions For Use’.
INSTRUCTIONS FOR USE
10
9
© The Dezac Group
© The Dezac Group
© The Dezac Group
