6
7
60 SECOND FACE TONER
TM
60 SECOND FACE TONER
TM
The 60 Second Face Toner has 3 exercise programmes with 17
power intensity levels. Best results are achieved by varying the
programme used. We recommend using Programme 1 on day 1,
followed by Programme 2 on the day 2, followed by Programme 3
on day 3, then back to Programme 1 on day 4 and so on.
To begin with the pulses give a mild tingling sensation and as the
intensity is increased you will notice muscle contractions. The muscle
contractions are smooth and each contraction will start with a slow
rise, hold itself in a contracted position for a few seconds and then
gently relax. We recommend starting on a low power level on each
treatment area and building up until muscle contractions are felt.
PROGRAMME 1 - FIRMING
Rhythmic muscle contractions to condition muscles with a short
interval between each pulse.
PROGRAMME 2 - EXTENDED FIRMING
This
offers
an
extended
muscle
contraction
with
pre-programmed varying intensity to maximise the workout.
PROGRAMME 3 - TAP TONING
Rapid stimulating action.
STEP 1
Apply a generous amount of conductive gel to each
of the ball contacts. Apply plenty of conductive gel to
ensure good contact with the skin.
STEP 2
Turn the unit on by pressing the programme/on/off
button, the light will turn green. The unit will start in
programme 1, the programme/on/off light will flash
once.
Note:
To select programme 2, press the programme/
on/off button once more. The green light will flash
twice to indicate programme 2 is selected.
To select programme 3, press the programme/on/
off button once more. The green light will flash three
times to indicate programme 3 is selected.
STEP 3
Onto clean skin, position both ball contacts for
treating the first area.
STEP 4
Increase power by pressing the (+) button and
move the position of the ball contacts if necessary
until you feel definite muscles contractions. If this is
uncomfortable, decrease power by pressing the (–)
button.
Note:
You will need to adjust the intensity level
when treating different areas of the face.
STEP 5
Hold the unit in position for 60 seconds to complete
treatment of the area.
After 60 seconds, reduce the power level before
moving onto the next treatment area.
STEP 6
After use, switch the unit off. Press and hold the
Programme/On/Off button for 2 seconds.
Note:
If unit is left on, it will automatically switch off
after 10 minutes.
HANDY TIPS
• Your teeth may feel slightly sensitive during treatment, this is
perfectly normal.
• Effective face toning and firming is based on a light and
gentle stimulating massage on your face muscles. Should you
experience any discomfort, you should add more conductive
gel, reduce the intensity by pressing the (-) button, or remove
the unit from the area being treated.
• Start at a low level to begin with until you get used to the
sensation.
• The forehead requires higher intensity levels. Press the (-) button
several times before returning to the facial area.
