M4501 SETUP
The indicator should be switched OFF before installing or removing this device.
The DSD Module is ‘cleared’ (formatted) using the indicator setup. Setup can be done via
the indicator keypad or the viewer program. See the indicator Quick Start or Reference
manuals for detailed setup information.
The indicator will ask to ‘clear’ the M4501 module if the Module is new from stock, or has
been transferred from another indicator. If a Module is swapped to another indicator, the
indicator will not have access to the previous indicator’s records. The only operations
allowed at this point are to clear the DSD Module for new usage or to return the Module to
the supplier.
INDICATOR SETUP
The indicator should be switched OFF before installing or removing this device.
Initial Power-Up of New DSD After Installation
NEW.DSD
CLEAR ?. . . . .Enter ‘OK’ or ‘Cancel’
Enable Automatic Clearing
Setup. . . . .
H.WARE. . . . .
DSD.HW. . . . .
AUTO.C
Select ‘On’ (default) or ‘Off’
M4501 TROUBLESHOOTING
If the annunciators remain flashing after initial installation and clearing, cycle power: if this
persists, clear the module or return to the supplier.
004M-612-100
