background image

Rinnai 

Wi-Fi Smart Port OIM

WARNINGS AND IMPORTANT INFORMATION

IMPORTANT

READ ALL INSTRUCTIONS BEFORE USING THE DEVICE AND APP

.

Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property 

damage, personal injury and/or death.

DANGER:

  Indicates an imminently hazardous situation which, if not avoided, will result in personal injury or death.

WARNINGS:

  Indicates a potentially hazardous situation which, if not avoided, could result in personal injury or 

death.

CAUTIONS:

  Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate 

injury or damage to the appliance. It may also be used to alert against unsafe practices.

NOTE

Read all the safety precautions carefully before installing the unit.
Outlined below are important safety guidelines which must be followed. 
Applicable system: iOS and Android. Recommended iOS 9.0 and above, Android 4.0 and above.
Due to special circumstances which may occur, not all Android and iOS systems are compatible with the App.  

The manufacturer will not be held responsible for any incompatibility issues.
The manufacturer will not be held liable for any issues and problems caused by the internet, Wi-Fi router and Smart 

devices. Please contact the original provider for further help.
Wireless safety strategy

• 

Smart Port only supports WPA-PSK/WPA2-PSK encryption and non encryption.

NOTE

Smart Phone camera needs to be 5 million pixels or above to ensure QR code scans clearly. 

Depending on your network, time-out may occur. Therefore, it may be necessary to repeat network configuration.

Содержание Smart Port WF-60A1





































Отзывы: