Rinnai RSEP1S25N, Инструкция по установке и эксплуатации

Страница: 7 / 40

7
SE+ Series Infrared Gas Heater Installation and Operation Manual
Table 1: OUTDOOR - MINIMUM CLEARANCES TO COMBUSTIBLES
The clearance to combustible material represents the minimum distance that must be main-
tained between the outer heater surface and a nearby surface. In an OUTDOOR application
the stated clearance to combustibles represents a surface temperature of 90F° (50C°) above
ambient temperature.
It is the installer ’ s responsibility to ensure that building materials with a low heat tolerance
which may degrade at lower temperatures are protected to prevent degradation. Examples of
low heat tolerance materials include awnings, vinyl siding, fabrics, some plastics, filmy materi-
als, etc.
Figure 1: OUTDOOR - MINIMUM CLEARANCES (Indoor Clearances Page 10)
See Table 2 Next Page for “ Suggested Mounting Height for Comfort ”
NOTE: ANGLE MOUNT IS MAXIMUM 30° TO AVOID DAMAGE
Application MODEL NO
Horizontal 30° Angle Under Ends
A S T B F U E
OUTDOOR RSEP1S25X - NG/LPG 5.5” 7” 9.5” 1” 9.5” 48” 3”
OUTDOOR RSEP1S35X - NG/LPG 7.5” 9” 9.5” 1.5” 21” 48” 5”
OUTDOOR RSEP2S50N - NG Only 12” 28” 16” 10” 36” 60” 21”
Note: Do not mount less than 8 ft
[2438 mm]
above floor.
Do not store or place anything directly under heater
Ensure mounting height in any location is sufficient to prevent patrons from
coming in contact with heater, and clearance to combustibles is maintained.