Rinnai
2
Portable AC Remote Controller OIM
NOTE
Before proceeding with the operation of your new Rinnai Portable Room Air Conditioner Remote
Controller, please read these instructions thoroughly and gain a full understanding of the
requirements features and operation of your new Remote Controller.
Please keep the Operation and Installation Manual for your new Portable Room Air Conditioner
handy so it can be referred to at any time in conjunction with these instructions.
REMOTE CONTROL OVERVIEW
1. ON/OFF Button
2. Fan Speed Button
3. Swing Button
4. Timer Button
5. Sleep Button
6. Temperature UP/DOWN Buttons
7. Fan Only Button
8. Cool Button
9. Dry (Dehumidifying) Button
BASIC OPERATION REMOTE CONTROLLER
The Rinnai Remote Controller allows for convenient operation of the appliance within a 8 metre range.
NOTE
A confirmation beep sounds to confirm that a successful controller input has been received by
the appliance.
BUTTON DESCRIPTIONS & OPERATION
1. "ON/OFF" Button
Press "ON/OFF" button to turn "ON" or "OFF" the Air Conditioner.
2. "SPEED" Button
Press "SPEED" to set the fan speed (LOW, MEDIUM or HIGH).
3. "+" and "-" Button to adjust temperature or time
(a) Press “+”and “-” to regulate the temperature (the unit is 1°C) and set the time (the unit is 1h).
The temperature ranges from 16° to 32°, and the time ranges from 1h to 24h.
4. "SWING" Button
Press "SWING" to turn "ON" or "OFF" the swing function.
5. "TIMER" Button
(a) When the air conditioner is turned "OFF", press "TIMER" to set a time to turn "ON" the Air Conditioner.
Press "+" or "-" to set the time, and press "TIMER" again to confirm it.
(b) When the air conditioner is turned "ON", press "TIMER" to set a time to turn "OFF" the Air Conditioner.
Press "+" or "-" to set the time, and press "TIMER" again to confirm it.
(c) After setting the time, press "TIMER" again to cancel the set time.
NOTE
After setting the time, press “TIMER” again to confirm it in 5 seconds. Without any operation
in 5 seconds, the air conditioner will confirm the time automatically. Pressing “TIMER” after
confirming the time this will cancel the set time.
2
3
1
9
6
4
5
7
8
GENERAL OPERATION
