Rinnai RINV25RB, Руководство по эксплуатации

Страница: 10 / 20

Rinnai 10 Split AC OM
ADJUSTING VERTICAL AIR FLOW
Continuous Circulation
1� To adjust the direction of the air flow vertically for an even air circulation, press
the “SWING↕” button once to activate a continuous cyclic movement of the
louvre. When cycling, “SWING↕” is shown on the LCD screen.
Fixed Direction
1� To adjust the direction of the air flow vertically in a fixed direction, press the “SWING↕” button once to activate
a continuous cyclic movement of the louvre.“SWING↕” is shown on the LCD screen.
2� When the desired flow direction has been reached press the “SWING↕” button again to stop the movement
of the louvre. “SWING↕” is no longer shown on the LCD screen.
3� Repeat the above steps to further adjust the flow direction or press the “SWING↕” button once to return to a
continuous cyclic movement of the louvre. When cycling, “SWING↕” is shown on the LCD screen.
CAUTION
DO NOT attempt to adjust the air deflector louvre manually as this can result in damage to the
louvre movement mechanisms.
ADJUSTING HORIZONTAL AIR FLOW (FOR RINV70RB ONLY)
Continuous Circulation
1� To adjust the direction of the air flow horizontally for an even air circulation,
press the “SWING↔” button once to enable a continuous cyclic movement of
the vanes. When cycling, “SWING↔” is shown on the LCD screen.
Fixed Direction
1� To adjust the direction of the air flow vertically in a fixed direction, press the “SWING↔” button once to enable
a continuous cyclic movement of the vanes. “SWING↔” is shown on the LCD screen.
2� When the desired flow direction has been reached press the “SWING↔” button again to stop the movement
of the vanes. “SWING↔” is no longer shown on the LCD screen.
3� Repeat the above steps to further adjust the flow direction or press the “SWING↔” button once to a return to
a continuous cyclic movement of the vanes. When cycling, “SWING↔” is shown on the LCD screen.
CAUTION
DO NOT attempt to adjust the air deflector vanes manually as this can result in damage to the
louvre movement mechanisms.
FAV (FAVOURITE MODE)
This mode enables you to save your favourite settings into memory and then recall
them later with one button press.
1� Press to turn on the power
2� Set your desired basic and advanced operation modes�
3�
Press and hold the “FAV” button until “iFavor” starts to flash on the LCD
screen� When the “iFavor” indicator goes out the settings have been stored�
4� To recall the stored settings press the “FAV” button once, “iFavor” is shown on
the LCD screen and the appliance will operate to the stored settings.
5� To cancel “FAV” mode press the “FAV” button once�
NOTE
Only one favourite setting can be stored into the memory at a time,
to enter a new set of favourites into the stored memory repeat steps
1 through 3.
Altering any of the settings while in “FAV” mode will return the
appliance to manual operation.
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER
ON OFF
ROOM
SET
C
F
h
SWING SWING
ON
OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER
ON OFF
ROOM
SET
C
F
h
SWING SWING
ON
OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER
ON OFF
ROOM
SET C
F
h
SWING SWING
ON OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER
ON OFF
ROOM
SET
C
F
h
SWING SWING
ON
OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
ADVANCED OPERATION