Rinnai RH-993CT, Инструкция по использованию и уходу

Страница: 10 / 13

FUNCTION KEYS: (Fig.11)
A == Automatic Stop Timer —15 minutes
B == Speed 1/“
－
”Control
C == Speed 2/“
＋
”Control
D == Speed 4
E == Light
By pressing key B
、
C or D individually, the speed for each key will be the
same as above table. At the same time indicated light will flash on the each
function key buttons. To stop the speed function press key A.
If Speed 3 is required
，
press key C adjust“
＋
”. At Speed 3 program both key
B and key C indication light will flash on each function key button.
To on the light press key E. To off the light press key E again.
When the appliance and light are ON together or separately, press key A the
Automatic Stop Timer will start the 15 minutes count down. Indication light
on the key A button will flash for the duration. To stop the Automatic Stop
Timer Function before 15 minutes time frame, press key A again.
• FUNCTION KEYS :
( Fig.14)
A= Filtering system / Set clock
B= Delay Timer
C= Speed S1/ “-” adjust / off
D= Digital display
E= Speed S1/ “+” adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time “ ”is flashing on the
digital display, it reminds the user to clean the filters. After the filter has
been cleaned assemble back. Press key A till the light is off and the unit is
back to setting function again.
When pressing key A for 3 seconds, the clock “ ”on the digital
display will flash, press key A to switch the mode function to set hours
and minutes, and then press key C or E to set the correct time. The
Clock’s system is 24 hours.
When the motor is on, press key B the light will on. At the same time
“ ” will flash on the digital display
，
and to press key B to
switch the function mode to set hours and minutes. To set the time to
automatically shut off, key C or E has to be pressed. Press key B for 3