Rinnai RH-9020A, Инструкция по эксплуатации, Страница: 6 / 10

Operating Instruction
Light Control Delay Button Turbo Speed Middle Speed Low Speed Power Control
Button Button Control Button Control Button Button
Power control button (Red light)
1. Push this button to turn on the power and power indicator light will be on.
2. Push again to turn off power
、
power indicator light and all functions.
Note:If power has been turned on over 9 minutes without any setting
,
system will be
shut down automatically for energy-saving.
3. For easy to clean the unit, press the power button 5 sec will automatic locked the
button function, at this moment the function board no function when the power light
twinkle. Press the power button 5 sec will unlock the it. And will power off.
Speed setting control button(Blue light)
1. Push turbo button to start extremely turbo speed revolution and turbo indicator light
will be on . Push again to turn off speed function only.
2. Push middle speed button to turn on middle speed ventilation and middle speed
Indicator will be on. Push again to turn off speed function only.
3. Push low speed button to turn on low speed ventilation and low speed indicator light
will be on. Push again to turn off speed function only.
Delay button(Green light)
Push delay button to turn on low speed ventilation and delay indicator light will be on ,
system will shut down automatically after 90 seconds. Push again to turn off delay
function only.
＊
Only for low speed
Light control button (Orange light)
1. Push this button to turn on the illumination and light indicator light will be on .
2. Push again to turn off the LED illumination only.
Note:If only push Speed/Delay/Light button, power also will be on.
CAUTION:
Each button function must press 0.5sec to activate, this is avoid the program hand up
when pressing the button too fast.
5