Rinnai RDT-400, Руководство по эксплуатации

Страница: 11 / 28

− 10 −
HOW TO USE
5
Press the “Start/Pause” Switch
The selected cycle lamp is on, together with the “operation/combustion” lamp. The
operation/combustion lamp changes from green to red after ignition, which takes 5 to 10
seconds. (The “operation/combustion” lamp may change to the green colour during operation
from time to time and this is normal.)
6
Drying is fi nished when the buzzer sounds. Take clothes out from the dryer.
Drying is finished when the buzzer sounds 3 times. If the
operation cycle of “General”, “Thick” or “Delicate” was chosen,
the “Finish” lamp will start to flash. It indicate the dryer is entered
into “Soft” operation automatically, (if the operation cycle of
“General” + “Extra Soft” or “Thick” + “Extra Soft” was chose,
then “Finish” lamp is on) the dryer will intermit drum operation
(12 second every 4 minutes) and send air so that clothes can
be kept softly, for a period of 32 minutes since the dryer has
finished. The “Finish” lamp becomes “On” when the “Soft”
operation is completed, it will keep alight until the front door is opened, the “Finish” lamp will
then turn off and the dryer will auto power-off after 10 minutes.
Open the front door and the “Soft” operation is automatically completed.
Ensure the “operation/combustion” lamp becomes green colour before taking clothes out from
the dryer.
You may notice a build up of static electricity in the clothes when you remove them from the
dryer. (for static electric protection, please refer to page 17 “How to use properly”)
RD60-132.indd 10 09.9.17, 3:19:51 AM