Rinnai RB-7022HE-CB Скачать руководство пользователя страница 9

6

seconds. The 'Lo' goes off and hob is unlocked.

When the hob is in lock mode, all keys are disable 

except ON/OFF. You can always turn the hob off with 
the ON/OFF key in an emergency, but you shall need to 
unlock the hob first in the next operation.

Minute Minder

You can use the timer as a minute minder while the 
cooking zones do not operate
To operate:
•     Turn on the hob, using the on/off key.
•  Press the timer key to operate this function 
•  Press on the power level key selector to set the 

time (00 to 99 minutes)

•  When the time has ended the buzzer will beep for 

30 seconds and display will shows " - "

•  To deactivate the minute minder, press the timer 

key to adjust the time to 00.

Timer

Count Down Timer
Use the countdown timer to set how long you want the 
cooking zone to operate
Set the countdown timer only after you have selected 
the cooking zone

The selection of timer function is only possible 

when the cooking zones are active and the heat setting 
is set
•  To set the cooking zone press on the corresponding 

zone selector key (i.e.

)that you wish to set the 

timer.

•  To activate the countdown timer, press the timer 

key 

 to operate this function

•  Press 

 or 

 of the power level key selector to 

set the desired minutes (0 to 9). Press the timer 
key 

 again, Press 

 or 

 of the power level 

key selector to set the desired tenths (0 to 9). The 
indicator of the cooking zone starts to blink. 

•  To see the remaining time press on the 

corresponding zone selector key, the display will 
show the remaining time

•  When the time is set, the countdown will begin and 

the display will show the remaining time. There 
will be a red dot in the right bottom corner of the 
power display to indicate which are the cooking 
zones is having this function turn on 

•  When the countdown function comes to an 

end the corresponding zone will be switchd off 
automatically.

•  To deactivate the countdown time, press on the 

corresponding zone selector key (i.e.

)

•  Press the timer key selector 

 to adjust the time 

to 00. The indicator of the cooking zone goes off.

Safety feature
Pan sensor (For induction zone only)

Each cooking zone is equipped with a pan sensor. The 
cooking zone emits heat only when a suitable cookware 
is placed on it. The display shows "U" if:
•  The cookware is incompatible for induction 

cooking.

•  The base diameter of cookware is too small.
•  The cookware is not centrally placed in the cooking 

zone.

The hob will switch to 'Standby mode' with display 
shows '--' after 1 minute; if no operation implemented, 
the hob will switch off 1 minute later.

Residual heat warning

When switching off a cooking zone, if the temperature
of the zone is too warm to be touched, the display will
show "H".
Avoiod touching the hob surface over the cooking area.
Please pay special attention to children.
"H" is turned off when the cooking zone temperature
drops below a present temperature.

Automatic switch off

This hob is equipped with a safety switch which 
automatically switches off the cooking zones after they 
have been in continuous operation at different power 
levels.
Suppose the front cooking zone is set to level 8, the 
cooking zone will switch off after 2 hours of continous 
operation, while the back cooking zone set to level 2 
will switch off after 6 hours of continuous operation.

Power levels

Cooking zone switches off after

1, 2, 3

8 hours

4, 5, 6

4 hours

7, 8, 9

2 hours

Useful Tip

•  Always place cookware on the cooking zone before 

switching on the appliance.

•  Take care to keep the control panel clean and never 

place the pans on the control panel sensors. The 
electronic unit beneath it could be damaged.

Содержание RB-7022HE-CB

















Отзывы: