Rinnai RB-3311D-GBS, Инструкция по эксплуатации

Страница: 11 / 20

11
●
Set the pan support properly as instructed.
*
Set pan support to top plate.
Double Simmer Series H, S
Simmer Series H, S
Installation of Gas Hose
●
Certified rubber hose for built-in hob must be applied.
●
The rubber hose must no be bent during installation and must be at appropriate length (less than 2 m).
●
During installation, make sure that the rubber hose must not touch the body
and bottom part of the built-in hob.
●
Set the securing ring over the rubber hose and connect to the gas inlet rear
side of the built-in hob till the red marked line. Secure the position of rubber
hose by tightening securing ring.
●
The installation of gas hose must be performed by a qualified installer according
to the relevant standards (For LP Gas).
Important
Once installation is complete, check the perfect seal of every pipe fitting, using a soapy
solution, never a flame.
Inner Flame Series H, S
H Burner S Burner
H Burner
H Burner
S Burner
S Burner
Mega Series
Gas inlet
Securing
ring
Red marked
line
Rubber hose