![Rinnai RB-2EHII Скачать руководство пользователя страница 3](http://html.mh-extra.com/html/rinnai/rb-2ehii/rb-2ehii_instruction-manual_1462503003.webp)
Burner Head S
Burner Body
Burner Head H
Electrode
GAP
GAP
X
Pan Support
- 3 -
Installation /
Instalasi
1. Pan Support
Fit Pan Support into Top Plate. (Fig. 3)
Pasang Pan Support ke atas Top Plate. (Gambar. 3)
•
Install the gas cooker in well ventilated area and keep away from any combustible or inflammable
object i.e. paper, oil, etc.
Pasang kompor gas ini pada ruangan dengan ventilasi udara yang baik dan jauhkan dari benda yang
mudah terbakar seperti kertas atau minyak.
•
If the gas cooker is to be installed near any combustible surrounding i.e. wooden walls, wooden
shelves, etc, there should be a distance of more than 15
cm (6 in) away from the surrounding
combustible. If the surrounding materials are fireproof, the clearance is not required.
Bila kompor gas dipasang dekat/dikelilingi benda mudah terbakar (seperti dinding kayu, rak kayu),
harus dipasang lebih dari 15 cm dari sisi dinding. Bila material/dinding disekelilingnya tahan api, bisa
dipasang pada jarak kurang dari 15 cm dari dinding.
•
Place the gas cooker on a stable and level surface.
Taruh kompor gas ini pada permukaan yang stabil dan rata.
•
This gas cooker is to be used for cooking purposes only. Do not use it to dry towel, clothes or any
other materials over it.
Kompor gas ini digunakan hanya untuk memasak. Jangan digunakan untuk mengeringkan handuk,
baju atau yang lain diatasnya.
•
Make sure that the following parts are fitted properly before use.
Sebelum digunakan, pastikan seluruh bagian kompor sudah lengkap dan sudah terpasang dengan
benar.
2. Burner Head
Fit burner head into burner body correctly, without any gap. (Fig. 4)
Pasang burner head ke dalam burner body dengan benar, tanpa adanya celah sedikit pun.
(Gambar. 4)
Fig. 3
Fig. 4
- 4 -
3. Installation of Gas Hose /
Pemasangan Selang Gas
Operating Instruction /
Petunjuk Penggunaan
Ignition /
Penyalaan
•
A specific rubber hose for gas cooker must be used.
Gunakan selang karet khusus untuk kompor gas ini.
•
The rubber hose must not be bent during installation and must be of an appropriate length
(less than
2m).
Selang karet tidak boleh bengkok, dengan panjang kurang dari 2 m.
•
During installation, make sure that the rubber hose does not come into contact with the body of the
gas cooker pass through the bottom part of the gas cooker to prevent melting of the hose.
Pada saat pemasangan selang gas, pastikan selang tidak bersentuhan dengan badan kompor gas
dan pastikan selang tidak melewati bagian bawah kompor agar selang tidak meleleh karena panas.
•
Place the securing ring over the rubber hose and connect the rubber hose to the coupler below the
rear side of the gas cooker till the marked red line. Then secure the rubber hose in position with the
securing ring (For LP Gas).
Masukan selang ke dalam cincin penguncinya dan pasangkan ke saluran gas pada sisi bawah
bagian belakang kompor sampai ke tanda merah. Kemudian kencangkan cincin penguncinya (Untuk
LPG).
1. While pushing the Control Knob, turn it to the left (toward to the “ON” position) slowly until you
hear a ‘click’ sound. Electronic spark will ignite Burners.
Keep pushing the Control Knob for several second until the Safety Device is operating.
If you release your hand halfway, electronic spark might not ignite Burners.
Tekan tombol lalu putar ke kiri (ke arah posisi “ON”) dengan lambat sampai terdengar bunyi “klik”.
Electrode akan menyalakan burner.
Tekan terus tombol untuk beberapa detik sampai sensor pengaman bekerja.
Bila anda melepas tekanan pada tombol tidak penuh, electrode tidak akan menyalakan burner.
2. If the flame goes out when you release your hand, repeat the ignition procedure again. Keep
pushing the control knob for a longer time, and then release your hand more slowly than last time.
Bila api mati pada saat anda melepas tekanan pada tombol, ulangi lagi sesuai prosedur penyalaan.
Tekan terus tombol lebih lama, dan kemudian lepas tangan anda lebih lambat dari sebelumnya.
3. Turn Control Knob to adjust flame to desirable setting.
Putar tombol untuk mengatur api sesuai keinginan.
4. Flame can be controlled at four steps as following. (Fig. 5)
Api dapat diatur dalam 4 posisi. (Gambar. 5)
out side flame
api besar
inside flame
api kecil
: Max
: Max
out side flame
api besar
inside flame
api kecil
: Sedang
: Middle
: Off
: Max
: Middle
: Sedang
out side flame
api besar
inside flame
api kecil
: Mati
: Max
: Off
: Min
out side flame
api besar
inside flame
api kecil
: Min
: Mati
: Max
: Max
PRESS
TEKAN
OFF
ON
PRESS
TEKAN
OFF
ON
PRESS
TEKAN
OFF
ON
PRESS
TEKAN
OFF
ON
Fig. 5
RB-2GH