- 4 -
IMPORTANT INFORMATION
Do not clean the Temperature Control with
solvents. Use a soft damp cloth.
When the hot water tap is open, and hot water is
flowing, the water temperature can only be
increased to a maximum of 43
°
C on the
Temperature Controller with priority.
If a temperature is higher than 50
°
C, and has
been selected at the Kitchen Controller and then
priority of temperature selection is transferred to
a Bathroom Controller and back again, the
temperature on the Kitchen Controller will drop
to 50
°
C. This is a safety feature.
Do not push the ON/OFF button on the Kitchen
Controller after having transferred priority of
temperature selection to the Bathroom Controller
as the system will no longer heat the water.
Turn OFF then ON.
WARNING
Someone may be about to enter a shower or fill
the bath.
Depending on the weather conditions and the
length of the pipe between the hot water unit and
the tap in use, there may be a variation between
the temperatures displayed at the Temperature
Controller(s) and the temperature of the water at
the tap.
There is no need to turn the Temperature
Controller(s) off after use. However, if you prefer
to turn the Temperature Controller(s) off,
selected temperatures will be stored in the system
memory at all times whilst mains power remains
connected.
43
o
C
ONLY
48
°
C
