Rinnai Energysaver RHFE-1004FTR, Как пользоваться инструкцией

Страница: 15 / 36

– 14 –
OPERATING THE HEATER TIMER (S)
3
Press the Timer 1 and/or Timer 2 button(s). The
Timer indicator(s) will glow and the heater will remain on
standby until one hour prior to the time programmed
into the selected Timer(s) is reached. When this time is
reached, the Timer indicator will flash and the heater will
operate. The ON indicator glows red when the heater
commences operation.
Timer 2 Timer 1
AM
PM
Override Economy
Set
Room
Temp
Time
Timer 1
Clock
Function Lock
Before operating The Timer(s), the clock time must be correct, and a starting time and
finishing time for the Timer(s) must be programmed. See pages 12 and 13. The two Timers
operate in the same way. This heater does not commence operation at the programmed
starting time. It will attempt to heat a room by the programmed starting time. (Pre-heat
function. Refer to page 15.)
1
To select the Timer(s) to commence heating, check
the time shown on the Digital Display is correct.
See page 12. Check the ON and OFF times, for
both Timers if necessary. See page 13.
Timer 2 Timer 1
AM
PM
Override Economy
Set
Set Times ON / OF
Room
Temp
Time
Timer 1
Timer 2
Clock
on off
2
Press the ON-OFF button to operate the heater.
The ON indicator will glow green and the heater will
begin to operate. Select the desired temperature
setting.
ON / OFF
If there is a power failure the system memory will retain the Timer programs, and the clock will
stop at the time power goes off. The clock will start again when the power comes back on,
but the time will be slowed by the duration of the power failure. To set the clock to the correct
time after the power has come back on, simply follow the instructions on page 12.
SET AND FORGET OPERATION
Your heater can be operated to alternate between Timers automatically during cold weather by
selecting Timer 1 and Timer 2 together. Both Timer indicators will glow.
The appliance will remain on standby at intervals between the programmed finishing and starting times
of each Timer. While the heater is operating with programmed intervals the Timer indicator will flash.