9
Using PeripheralVision
®
to Configure the Router
Full operational procedures for PeripheralVision
®
are detailed
in the program helpfile, refer to this if any problems are
encountered in the procedure detailed below.
1
Install PeripheralVision
®
onto a PC on the Ethernet network.
2
Ensure the router hardware installation is complete.
3
Using the Locate NPMP
TM
discovery tool in
PeripheralVision
®
, enter the default set IP
address (11.22.33.44). The router will appear
on the network map, it will be an icon similar to
the example on the left.
4
Left click twice on the icon to open up the property pages of the
device. The default displayed page will be the Name page.
This is shown below:
5
In the Icon Title field enter a name for the router that will allow it
to be identified on the PeripheralVision
®
network map.
6
Using the arrows in the top right corner, scroll the pages and
click on the first IP Router page. This is shown following:
