ring RBGDC200, Инструкция по эксплуатации

Страница: 111 / 111

Dash Camera Troubleshooting Guide
Page | 5 Rev 1
A symbol will then display on the screen to show night vision is activated
3. Suction cup not sticking to windscreen
Ensure the protective film has been removed from the suction cup
If temperature is below 5 deg C then gently warm the area before attaching suction cup
Do not stick suction cup to areas of the windscreen printed with a sunshade area, as this will not provide
the best adhesion
If problem cannot be resolved
If the camera has an issue that cannot be resolved using the troubleshooting section above,
then press the RESET button with a paperclip to reset the camera back to its factory settings
If the problem still persists then contact Ring Technical Support on:-
Tel: 0113 213339 or Email:
technicalsupport@ringautomotive.co.uk