Fig3 – Example RCD installation
CAUTION
It is recommended the inverter is wired and tested by a qualified electrician
Remote Mounting LCD Display (1000/2000/3000W Models)
For installations where the inverter may be inaccessible, the LCD display can be removed from the
inverter and mounted remotely using the optional LCD Frame Kit (WINVFRM)
1.
Ensure that the inverter power on/off switch is in the OFF (0) position.
2.
Remove 2 x screws holding LCD in position
3.
Pull LCD forwards and unclip data connector from circuit board
4.
Connect 6 metre extension lead to circuit board
5.
Fit blanking plate and fix with 2 x screws, a slot is provided for cable to exit
6.
Fix LCD into mounting frame using 2 x screws
7.
Fit frame where display is required and attach 6 metre cable to rear
8.
Snap fit endplates to cover screw fixings
9.
Turn the power on/off switch to the ON (I) position.
10. Inverter can now be controlled remotely from the LCD display
6
2
Содержание PSW-1000
Страница 3: ......