ring Alarm Keypad 2nd Generation, Руководство пользователя

Страница: 3 / 12

3
Installation & Set Up
Ring Alarm Keypad – Basic Setup & Installation
In-app Setup
1. Ensure your Ring Alarm system is disarmed.
2. In the Ring app, tap Set Up a Device and find the Keypad in the Security Devices menu.
3. Follow the in-app instructions to complete setup. Plug in the Keypad to trigger setup mode.
Installation
1. Choose a location for installing the Keypad.
2. Use the provided bracket and place the Keypad on a flat surface. For wall mounting, use the screws
and anchors to secure the bracket to the wall and slide the Keypad into place.
3. Using the provided double-sided tape, peel the backing and attach the Motion Detector to the
mounting location.
Note
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor
to increase reliability of the network.
This is a SmartStart enabled product which can be added into a Z-Wave network by scanning the
Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further
action is required and the SmartStart product will be added automatically within 10 minutes of being
switched on in the network vicinity. This product can also be operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturers.
Z-Wave Instructions
Z-Wave Device Type: Entry Control Keypad
Role Type: Listening Sleeping Slave
GENERIC_TYPE_ENTRY_CONTROL (0x40)
SPECIFIC_TYPE_SECURE_KEYPAD (0x0B)