This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by
the user that are not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on the
product is on file with the FCC and can be found by inputting such Product’s FCC ID
(which can be found on the device) into the FCC ID Search form available at https://
www.fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is:
Ring LLC, 1523 26th St, Santa Monica, CA USA, 90404
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Product is below the radio frequency
exposure limits set by the FCC. This device should be installed and operated with a mini-
mum distance of 20cm between the radiator and your body. It is advised to use the Product
in such a manner that minimizes the potential for human contact during normal operation.