Plug the cigarette lighter into the 12v socket. (Fig 1)
Screw the valve connector clockwise onto the tyre valve stem. Ensure the
connector is well connected with the stem. (Fig 2)
Hold + or – for more than 5 seconds until LCD display flashes. The figure that
first appears is the default value (30psi) To change this, press the + or – to the
required pressure setting and wait 2-3 seconds. The LCD will display the
current pressure value for the item to be inflated.
Press the M button and the LCD will display “ON” to indicate that the
compressor is ready to start working.
Push the ON/ OFF for the compressor to start, when the pressure value
reaches the required value. The compressor will automatically switch off and
the LCD display will show “OFF”.
The ON/OFF button can be used to override the preset pressure value if
required.
Note
:- The gauge on this compressor is for guidance only. Check pressure with a
known accurate gauge.
The compressor can be used without the engine running but this will drain the power
from the battery.
For Inflatables
Select the suitable adapter and insert into the valve connector.
Insert the connector adapter into the appropriate inlet of the inflatable
Plug the cigarette lighter into the 12v socket. (Fig 1)
Push the on / off button to switch the compressor on.
Only inflate product to the manufactures specifications
Typical Inflation Pressure
Bicycle tyres 35-40psi
Football
13psi
Basketball 9psi
Volleyball
5psi
Lawn tractor tyre 22psi
Caution should be taken not to over inflate.
Push the ON/ OFF button to switch the compressor off.
Remove adapter from the inflatable and remove adapter from the connector.
Cautions
Inspect before each use. Do not use the compressor if bent, broken, melted, burnt, wet or
any of the components are damaged.
Do not kink or block the air hose while the compressor is working.
Distributed by Ring Automotive Ltd, Gelderd Road, Leeds, England, LS12 6NA.
Tel: +44 (0)113 2137339, Fax: +44 (0)113 2310266,
E-mail: [email protected]
Web: www.ringautomotive.co.uk
Ring Automotive Ref:- L267
