Rinex GA8500, Руководство пользователя

Страница: 26 / 39

GuideTRAX User Manual Addendum Page 18 Rev B
P/n 1-1293
users so that the GA8500 can be used without any other switches being
required.
The GA8500 must be installed with the optional power cable which
contains an ignition sense wire. The system will start up and shut down
with the vehicle, when the ignition key is turned. No further user
intervention is required. The system will start and display messages as
denoted above.
Similarly to shut the system down the GA8500 will commence the shut
down process described above once the vehicle’s engine has been
switched Off.
Hints and Tips:
Do not turn the system off by removing power to the GA8500.
Shutting down the system in this way may cause the loss of
important system information.
If the GA8500 does not respond to either the ignition switch or
pressing the power button to shut down, the user may choose to
force a shut down. Press and hold the power button for five
seconds, after which time the system will sound three beeps.
Release the power button and the system will turn off. Forcing a
shut down should only be used as a last resort, as system data and
settings may be lost as a result. If it necessary to regularly force a
shutdown to turn the system off, it is recommend that the user
contact RINEX to correct the source of the problem.
It should be noted that the Power Control Switch will override the
ignition switch.