User manual
Baby Kangoo RB202
21
EN
NOTE:
Wireless cameras require a power source (either an electrical outlet or battery power) to operate.
If you plan to permanently mount the camera in a location, it is recommended to use the included Camera
Power adaptor to prevent interruptions in the image, as using battery power is intended as a temporary
power solution.
POWER ADAPTOR:
Connect the Power Adaptor to the Camera. Make
sure the power adaptor is placed into a grounded
outlet or surge bar to protect the camera from power
fl uctuations.
Power Adaptor: Connect the Power Adaptor to the
5V Input on the back of the camera.
BATTERY PACK:
1. Remove the Battery Cover off the base of the
Camera.
2. Insert 4 x AA Batteries (not included) into the Battery
Pack. Make sure to correctly line up the Positive (+)
and Negative (-) terminals of the batteries.
Place the Battery Pack cover back on.
NOTE:
If the Camera is plugged in with the AC
Adaptor, the batteries will not be used. The batteries
are intended for short term, portable Camera use
only.
Camera Positioning
The Camera can be placed on a fl at surface,
or wall mounted. The versatile stand allows
for several diff erent mounting options.
Viewing Mode
1. SIGNAL INDICATOR
The signal indicator shows the strength of the signal being received from the camera. The number of bars
in the Signal Indicator shows the strength of the signal – One or No Bars indicates the signal is poor, and 4
bars indicate a very strong signal.
Signal Indicators:
Low Signal
Perfect
