2
2000538_C
Maintain the
Producer™ III
Preventative Maintenance Schedule
Note:
Your system may require more frequent maintenance if used in a dusty area, such as a store or warehouse.
Before you begin:
Warning!
,
Always power off the autoloader and unplug the power cord before you access the embedded PC.
Power off the
1.
Producer III
.
Disconnect the
2.
power cord
.
Important!
-
Failure to follow the maintenance schedule outlined below may void your warranty.
Task
Tool
Frequency
Wipe down the lift arm shaft and pay
close attention to:
The area around the base of the
•
shaft
The area just above the lift arm
•
Lint-free cloth
Weekly
Wipe down all surfaces of the
autoloader, including:
Sides and top
•
Door
•
Output bin
•
Carousel
•
Base (remove the carousel first)
•
Top surface on the lift arm
•
Lint-free cloth
Non-abrasive, all-purpose cleaner
Weekly
Remove dust and debris from the fans
at the back of the autoloader.
Can of compressed air
Monthly
Remove dust and debris from the
openings at the back of the autoloader.
For embedded systems only (6100N,
7100N, and 8100N), remove the
carousel and remove dust and debris
from the openings to the PC module.
Vacuum
Monthly
Align the printer. Refer to the
Align the
Printer
instructions
in your User Guide
.
Torx T25 screwdriver
Upon installation, if the discs are not
picked correctly from the printer tray, or
if there are clamping errors.
English
