Rimage 2000i Series II, Руководство пользователя

Страница: 4 / 161

1
For more information visit rimage.com/support
2002760_A
Introduction
This manual provides the information needed to operate, identify the parts
of, and configure the printing preferences for the Rimage 2000i Series II.
To set up and install your Rimage 2000i, refer to the
Rimage 2000i Series II
Setup and Installation Guide included with your product.
For technical information, refer to the Rimage 2000i Series II Specification
document found at www.rimage.com/support . From the Support page
select: Desktop Series > Rimage 2000i Series II > User Manuals tab.
About this User Guide
• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our
website always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 7 paths. Other Windows operating systems’ navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Note: A Note provides supplemental information or information that
may apply only in special cases. For example, memory limitations,
equipment configurations, or details that apply to specific versions of a
program would be included in a Note.
Tip: A Tip provides techniques and procedures to help with your specific
needs. A Tip suggests alternative methods that may not be obvious and
helps you understand the benefits and capabilities of the product.
Important! An Important note provides information essential to the
completion of a task. You can disregard information in a note or tip and
still complete a task, but do not disregard an Important note.
n
Caution:
A Caution indicates that failure to observe this guideline
could result in loss or damage to the equipment, product, software,
or data.
n
Warning!
A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining
the equipment.
About Your Product
The Rimage 2000i Series II is part of the Desktop series of autoloaders. It
is a robotic-controlled autoloader with two recorders, a two-line display
panel, and an embedded 480i printer. The Rimage 2000i records and prints
discs. When the discs are finished, the Rimage 2000i places them in the
output bin. The terms “480i printer” and “Rimage 2000i printer” are used
throughout this guide to refer to the embedded 480i printer.
Important! Your Rimage 2000i may not look exactly like the model featured
in this user guide.
The Rimage 2000i operates with Rimage Software Suite—Network. When
installed with Rimage Software Suite—Network, the Rimage 2000i can be
shared on a network, allowing all users to create discs from their desktops.
For more information about setting up and submitting orders over a
network, refer to the
Rimage Advance Setup (Networking) Guide
available at
www.rimage.com/support . From the Support menu select:
Desktop Series >
Rimage 2000i Series II> User Manuals tab.