Rima ONGAS MEGA 05, Руководство по установке

Страница: 29 / 60

29
DHW key
Activation is performed by holding the DHW operating mode button on the room unit or
operator for at least 3 seconds.
It can may be started in the following conditions:
• Operating mode is “Off”
• When switching between the operating modes are active as H1 or centrally (LPB),
• If all heating circuits are in vacation mode.
2.4.Changing the Set Point of the Room Temperature: Rotate the adjustment key to + or - direction
to decrease or increase the comfort value
For reduced set point
Press the OK button.
- Select “Heating circuit” in the operating page and
- Set the desired temperature value for economy.
After each setting operation, wait at least two hours for the room temperature to reach the specified
level.
2.5.Stand-by Button: If the rooms shall not be used for a certain period of time, you can press the
stand-by button to reduce the room temperature; this allows savings of thermal energy.
When the rooms shall be used again, press the stand-by button again to resume heating operation.
Comfort heating set point
Economy heating set point
The stand-by button is active during automatic operation only. The current selection shall be active
until the next switching operation performed as per the selected heating program.
2.6. Indicator Information: You may display certain data by pressing the data button.