RIM 1802G страница 2 Скачать руководство пользователя

Страница: 2 / 76

RIM OEM Radio Modem for GSM/GPRS Wireless Networks

Version 1.

Integrator Guide

Last revised: 22 August 2003

Part number: PDF-04522-005

MAT-05744-002

related marks, images and symbols are the exclusive properties of Research In Motion Limited.

RIM, Research In Motion, ‘Always On, Always Connected’, the “envelope in motion” symbol and

the BlackBerry logo are registered with the U.S. Patent and Trademark Office and may be pending

or registered in other countries. All other brands, product names, company names, trademarks and

service marks are the properties of their respective owners.

The handheld and/or associated software are protected by copyright, international treaties and

various patents, including one or more of the following U.S. patents: 6,278,442; 6,271,605; 6,219,694;

6,075,470; 6,073,318; D445,428; D433,460; D416,256. Other patents are registered or pending in

various countries around the world. Visit www.rim.net/patents.shtml for a current listing of

applicable patents.

While every effort has been made to achieve technical accuracy, information in this document is

subject to change without notice and does not represent a commitment on the part of Research In

Motion Limited, or any of its subsidiaries, affiliates, agents, licensors, or resellers. There are no

warranties, express or implied, with respect to the content of this document.

Research In Motion Limited

295 Phillip Street

Waterloo, ON N2L 3W8

Canada

Research In Motion UK Limited

Centrum House, 36 Station Road

Egham, Surrey TW20 9LF

United Kingdom

Published in Canada

Содержание 1802G













































































Результаты поиска

Содержание 1802G

Отзывы:

Похожие инструкции для 1802G

Бренды по названию

Популярные бренды

RIM 1802G, Руководство интегратора

Результаты поиска

Содержание 1802G

Отзывы:

Похожие инструкции для 1802G

Бренды по названию

Популярные бренды