SAFETY INSTRUCTIONS
EXTENSION CORDS
Keep the extension
cord clear of the working area. Position
the cord so that it will not get caught on
lumber, tools or other obstructions while
you are working with a power tool.
Check extension
cords before each use. If damaged
replace immediately. Never use a tool with
a damaged cord, since touching the
damaged area could cause electrical
shock, resulting in serious injury.
Use a proper extension cord. Only use cords
listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in
line voltage, resulting in a loss of power and
overheating of tool. When operating a power
tool outdoors, use an outdoor extension cord
marked “W-A” or “W”. These cords are rated
for outdoor use and reduce the risk of electric
shock.
Page 8
SPECIFICATIONS
MOTOR POWER ................... 1HP, 120V, 7A, 60Hz, 1Ph, Induction
MOTOR RPM (no load) ................................................... 1750 RPM
MOTOR ARBOR ........................................................................ 5/8”
ARBOR THREADIING ........................................... M16LH / M16RH
GRINDING WHEEL SIZE ..................... 8” Dia. x 1” Wide, 5/8” Bore
GRINDING WHEEL GRITS (2) ......................... 60 Grit and 120 Grit
TOOL RESTS (2) ..................................................... 4-5/16” x 1-7/8”
EYE SHIELDS (2 pr.)................Clear Plastic and 2.5x Magnification
SPARK ARRESTORS .................................................Left and Right
ON/OFF SWITCH ....................................... Toggle and Safety Lock
DUST PORTS (2) ........................................................... 31mm O.D.
LIGHT .................................................................. LED, 12V / 0.36W
POWER CORD ...................................................................... 6 Feet
WEIGHT ................................................................................. 54 lbs.
GRINDER BASE (LxW) ........................................... 9-9/16” x 6-1/2”
MOUNTING HOLES (2) ............................... 7/16” Dia., 8-1/4” Apart
OVERALL SIZE Approx. (LxWxH) ..............................19” x 12” x 14”
NOTE:
The specifications, photographs, drawings and information in this manual represent
the current grinder model when the manual was prepared. Changes and improvements may
be made at any time, with no obligation on the part of Rikon Power Tools to modify previously
delivered units. Reasonable care has been taken to ensure that the information in this manual
is correct, to provide you with the guidelines for the proper safety, assembly and operation of
this machine.
