manualshive.com logo in svg

Rikon Power Tools 70-220VSR, Руководство оператора, Страница: 21 / 24

Поделиться
Скачать
Rikon Power Tools 70-220VSR Скачать руководство пользователя страница 21

21

WIRING DIAGRAM

                             

    

This machine must be grounded. Replacement of the power supply cable should only 

                                    be done by a qualified electrician. See page 5 for additional electrical information.

This tool is intended for use 

on a circuit that has a 120 

volt electrical receptacle. 

The illustration on page 5 

shows the type of the 120v, 

3-wire electrical plug and 

electrical receptacle that has 

a grounding conductor that is 

required.

ACCESSORIES

70-901   24” LATHE BED EXTENSION  

Made of heavy cast iron, it bolts to the right end of the 

70-220VSR Midi Lathe to extend the lathe’s working 

spindle length capacity to 44”.

Universal, all-steel Stand 

Extension bolts onto the 

70-910 and 70-920 stands 

to support lathes with Bed 

Extensions. The stand ex-

tension adjusts from 18-3/4” 

to 32-1/4” long, and 24-1/2” 

to 34-1/2” working height.

ADDITIONAL LATHE ACCESSORIES  

 

For additional lathe accessories or replacement parts, 

contact your local RIKON distributor, or visit the RIKON 

website at www.rikontools.com.

Tool rests, Face Plates, Drive Centers, Spur & Live 

Centers, Drill Chuck & Arbor, Drive Belts, etc.        

70-913   LATHE STAND EXTENSION  

 

Universal, all-steel 

Stand adjusts from 

23-1/4” to 37-1/4” long, 

and 24-1/2” to 34-1/2” 

working height.

70-920   LATHE STAND

Содержание 70-220VSR

























Отзывы:

Нет отзывов