Rikon Power Tools 63-100, Руководство оператора

Страница: 8 / 16

8
CONTENTS OF PACKAGE
FIG. 1
A. Canister Body
B. Band Strap Clamp
C. Paper Filter Bag &
Cartridge Filter
D. Motor Lid Assembly
E. Dust Hose - 4” Diameter
F. Paper Filter Bags (2)
G. Hose Clamps (2)
H. Handle & Screws (2)
I. Manual & Warranty Card
LIST OF LOOSE PARTS
-
Slotted Screwdriver
- 5mm Hex Wrench
ASSEMBLY
THE MACHINE MUST NOT BE PLUGGED IN AND THE POWER SWITCH
MUST BE IN THE 'OFF' POSITION UNTIL ASSEMBLY IS COMPLETE.
1. Place the cartridge fi lter with open end
facing up, inside of a paper fi lter bag. FIG. 1.
NOTE: The paper fl iter may already be pre-
assembled onto the cartridge fi lter. If this is
the case, please go to Step 4 of the assembly
instructions to continue the assembly process.
The 63-100 Dust Extractor is a DRY USE ONLY vacuum system. It is NOT to
be used for water clean-up. Any use beyond its intended purpose could cause failure or injury,
and will void any written or implied warranty.
To assemble the Dust Extractor:
PAPER FILTER BAG
Tools Required for Assembly
E
A
B
C
D
F
G
H
63-100
www.rikontools.com
63-100M2
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
Dust Extractor
Dry Use Vacuum System
with 12 Gallon Capacity
Operator’s Manual
4001824
I
CARTRIDGE FILTER