Rikon Power Tools 10-336, Руководство пользователя

Страница: 9 / 18

Changing the Blade Speed
WARNING! Before carrying out any adjustment or
maintenance, ensure that the machine is isolated
and disconnected from the electricity supply.
This Bandsaw has two blade speeds, low speed
and high speed.
The lower bandwheel (A--Fig.12) has two, integral,
multi-vee form pulleys and the motor shaft has a
twin multi-vee form pulley (B--Fig.12).
The multi-vee belt (C--Fig.12) passes around the
bandwheel pulley and the motor pulley. The belt
tension is released and applied by using the Belt
Tension & Speed Change Handwheel (D--Fig.12).
For the high speed, the belt should be fi tted to the
rear pulley on both the motor and bandwheel. As
shown in Fig.12.
For the low speed, the belt should be fi tted to the
front pulley on both the motor and bandwheel. As
shown in Fig.12.
A
B
C
D
High Speed
Fig.12
Low Speed
Fig.13
8