2
TABLE OF CONTENTS
Safety Instructions ........................................................................................................2
Contents of Package .....................................................................................................2 & 3
Assembly ...................................................................................................3 - 6
Adjustments...........................................................................................................7 - 9
Maintenance ..........................................................................................................9
Parts Diagrams & Parts Lists ..................................................................................10 - 11
SAFETY INSTRUCTIONS
1. The machine must not be plugged in and the power switch must be in the OFF position until assembly is
complete.
2. Do not install the Tool-less Blade Guide Retrofit System until you have read all of the instructions.
3. Installation of this Retrofit System must be done according to the following directions to correctly install
the parts, and to insure that the future operation of the machine is proper and safe.
4. Any other bandsaw use not as specified, including further modification of the machine or use of parts not
tested and approved by the equipment manufacturer, can cause unforeseen damage and invalidate the
warranty.
5. Refer to your Bandsaw’s Operation Manual for complete details on your bandsaw’s Safety Instructions,
Assembly, Adjustments and Operation.
6. If you are not familiar with the operation of the machine, obtain assistance from a qualified person.
7. Work in a clean, well lit area to keep tools and machine parts organized and safe.
California Prop 65 WARNING:
This product contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
For more detailed information about California Proposition 65 log onto rikontools.com.
Model 10-900 Tool-less Blade Guide System Retrofit Kit is shipped complete in one box.
Unpacking and Checking Contents
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to
make sure that all of the items are accounted for, before discarding any packing material. Place parts on a
protected surface for easy identification and assembly.
2. If any parts are missing or broken, please call RIKON Customer Service (877- 884-5167) as soon as
possible for replacements. DO NOT start assembling the Retrofit Kit onto your machine, or use the bandsaw if
any of these items are missing. You may cause injury to yourself or damage to the machine.
3. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is
running properly, in case a product return is necessary.
CONTENTS OF PACKAGE
SAVE THESE INSTRUCTIONS.
Store them with your Bandsaw’s Operator’s Manual for future reference.
