Riken Keiki GW-3, Руководство по эксплуатации

Страница: 15 / 75

2. Important Safety Information 2-3. Caution information
15 / 73

Note that humidity may affect readings even when humidity is within the specified range.
Air calibration

Air calibrate the product using fresh air at pressures, temperatures, and humidity levels similar to the actual
usage environment.

Wait for the readout to stabilize before performing air calibration.

If the temperature difference between the storage location and usage location is 15 °C or greater, turn on the
power, allow the product to adjust to ambient conditions similar to those at the usage location for about
several tens of minutes
*1
, and perform air calibration using fresh air before using the product.
Miscellaneous

Pressing buttons unnecessarily may change settings and prevent alarms from activating correctly. Avoid
performing any operations not described in this technical manual.

Do not drop the product or subject it to impact. Doing so may degrade waterproof and explosion-proof
performance or reduce sensitivity.

Do not poke the sensor or buzzer sound opening with sharp or pointed items. Doing so may result in
malfunctions or damage to the product, preventing accurate measurements.

The product is a precision device. Do not subject the product to strong impact or vibration.

If the product is used in cold conditions, the intrinsic properties of the battery may cause the low battery
voltage alarm to occur sooner than usual.
When using the product at temperatures below 0 °C, confirm that the battery level icon shows at least three
bars.

Keep the product away from magnetic fields. Magnetic fields may cause the product to fail or malfunction. If
the product does not operate correctly, use it away from magnetic fields.

Replace the batteries promptly.
If the product is stored for extended periods with the batteries removed, a [FAIL SENSOR] (sensor
abnormality) alarm may occur in rare cases when the power is turned on. If this occurs, wait several
minutes
*2
before turning the power back on.
Battery replacement

Be sure to turn off the power for the product when replacing the batteries.

Always replace the batteries with new batteries.

Note the polarity when inserting the batteries.

Do not use any batteries other than the types specified.