RIKA ROCO Скачать руководство пользователя страница 23

|

23

EN

22

10. WARNING AND ERROR MESSAGES

During operation, unforeseen circumstances or intervention by the user may lead to malfunctions or interruptions of the control process. There is a differentiation 

between warnings and error messages. Warnings are interruptions caused by the user; they can be eliminated by correct actions. Error messages are malfunctions 

of components or discharges during operation. These must be acknowledged by the user so that operation can continue.

Note

If error messages recur directly, customer service is to be notified immediately. In the case of error messages that pose a safety risk, burnback and flue gas 

flap is activated and the stove is automatically switched off.

Warnings

display

meaning

action to be taken

Please Close Door

WARNING

PELLET CONTAINER
LID OPEN

Display for open combustion chamber door and/or 

pellet container lid.

Close the combustion chamber door and/or the 

pellet container lid.

WARNING

ROOMSENSOR
SIGNAL LOST

Manual Mode

There is no valid signal between the stove control 

system and the room sensor. 

Verify if the wireless room sensor is connected 

properly. Check the light of the receiver and change 

the batteries in the transmitter if necessary.

ERROR

PLEASE PERFORM
SERVICE

Perform service (maintenance)

Perform service (see CLEANING AND MAIN-

TENANCE)

VACUUM
CONTROL

check vacuum

WARNING

The negative pressure in the combustion chamber 

is below a defined limit value.

Check that the combustion chamber door is closed.

Содержание ROCO

































Отзывы: