RIKA E15883, Руководство по сборке

Страница: 9 / 12

|9
EN
8
Remove the lifting handles and secure the stove module with the
lock nuts included in the shipment (4x).
Secure the drag chain on the stove module with two hex screws.
Attach the end of the drag chain to the base module.
Mount the bottom cover on the base module.
Lay the control panel cable alongside the lower base (behind the
cover), running it through the opening of the touch display.
Be sure that the On/Off (I/O) switch is in OFF (O) position and connect
the power cable to the mains supply.
Note
Be sure that no cable can touch a hot surface.
Adjusting the front panel
Turn the lock screws on the pull-out guide upwards again, carefully
pushing the stove module into the warm-air tiled stove.
Check the clearance between front panel and tiled stove.
Note
The minimum clearance between front panel and brickwork must
be 5mm!
The clearance between front panel and warm-air tiled stove can be
adjusted laterally over the fastening of the front panel to the stove
body.
#10
#8
#2
#8
#8