Rigol USB-GPIB-L Adapter, Руководство пользователя

Страница: 8 / 20

RIGOL
6 USB-GPIB-L Adapter User's Guide
English
Basic Operations
Connection Method (refer to Figure 2)
1. Connect the USB interface of the adapter to the USB Host interface of the
RIGOL 's instrument.
2. Connect the GPIB interface of the adapter to the GPIB bus controller.
Figure 2 Diagram of the Connection Method of USB-GPIB-L Adapter
CAUTION
To ensure that the adapter works normally, please connect the
adapter according to the above procedures.
Set the GPIB address
You can set the GPIB address through RIGOL 's instrument or the remote
controller. The default GPIB address of the adapter is 16.
System Requirements
Each adapter controls only one instrument and does not support using the USB
hubs to control several instruments simultaneously.
Tip
You can view the power status of the adapter through the LED indicator. If
you connect it to the RIGOL 's instrument properly, but the LED indicator
does not shine, please contact RIGOL to locate the problem. Do not
disassemble it by yourself.
Controller Adapter
RIGOL
's
Instrument