RIGOL
TX1000 RF Demo Kit Application Note
12
To Control TX1000 Using DSA800
When using TX1000 with the DSA800 series, you can control TX1000 using the built-in control
interface of DSA800 without using the PC and PC control software.
1.
Connect TX1000 and DSA800 using the USB cable provided with the accessories.
2.
Press System at the front panel of DSA800 and press
to open the second page menu.
Press TX1000 to open the control interface as shown in the figure below.
Figure 5 Built-in TX1000 Control Interface of DSA800
3.
You can use the menu at the right to control the state of the five switches respectively.
