- 5 -
shown in Figure 2.
Figure 1 Figure 2
3
．
Set the probe: press
LA at the front panel of the oscilloscope to
enter the probe setting menu. Users can view and set the following
parameters under this menu: threshold level (the threshold levels of
D0-D7 and D8-D15 can be adjusted independently), waveform size
(applicable to all the channels; wherein, item L is only available when
the number of active channels is no more than 8), channel label, probe
calibration and so on.
Note:
When the probe is connected to the oscilloscope for the first