Rigol DS4000E Series, Руководство по программированию

Страница: 186 / 278

RIGOL Chapter 2 Command System
2-174 DS4000E Programming Guide
:SAVE Commands
Command List:

:SAVE:CSV[:STARt]

:SAVE:CSV:FACTors

:SAVE:CSV:LENGth

:SAVE:FORMat

:SAVE:IMAGe[:STARt]

:SAVE:IMAGe:TYPE

:SAVE:IMAGe:FACTors

:SAVE:SETup[:STARt]

:SAVE:TRACe[:STARt]

:SAVE:WAVeform[:STARt]

:SAVE:REFerence[:STARt]

:SAVE:MTESt[:STARt]
:SAVE:CSV[:STARt]
Syntax
:SAVE:CSV[:STARt] <file_spec>
Description
Saves the waveform data to the external memory in "*.csv" format.
Parameter
Name Type Range Default
<file_spec> ASCII String
<file_spec> includes the file storage location and
the filename with a suffix. Its length cannot exceed
64 characters. If the USB storage device is inserted
into the USB HOST interface of the rear panel, the
storage location is E:\; if inserted into the USB
HOST interface of the front panel, the storage
location is D:\. For example, E:\123.csv
--
Remarks

If the specified storage location already contains a file with the same filename, the original file will be
overwritten.

The stored "*.csv" file includes the current horizontal time base, start point time, and voltage value
corresponding to each point of the enabled channel. You can open and edit the file via Excel.
:SAVE:CSV:FACTors
Syntax
:SAVE:CSV:FACTors <bool>
:SAVE:CSV:FACTors?
Description
Enables or disables the parameter save function when saving the "*.csv" file; or queries the on/off status of
the parameter save function when saving the "*.csv" file.
Parameter
Name Type Range Default
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF