Rigol DS2000 Series, Руководство по обслуживанию

Страница: 15 / 24

Chapter 1 Disassemble and Assemble RIGOL
DS2000 Service Guide
1-7
Disassemble the Front Panel and Knobs
Figure 1-6 Disassemble the Front Panel and Knobs
Part Explanations:
①
9 knobs.
②
9 screws (#PM/SW/ FW3*6 torx pan head screw assembly) fixing the front panel.
Dsiassemble Steps:
1. Remove the 9 knobs (
①
).
2. Remove the 9 screws (
②
) fixing the front panel using the screw driver (T10).
3. Take off the front panel gently.
Tip
When removing the knobs, you are recommended to prize out the knobs using
tools similar to the lever. Besides, it is recommended to place a soft washer at
each force-bearing point to avoid damaging the button film and knobs.
①
②
②
②
②
②
②
②
②
②