Rigol DG952, Руководство по программированию

Страница: 37 / 205

Chapter 2 Command System RIGOL
DG900 Programming Guide 2-25
*RCL
Syntax
*RCL {0|1|2|3|4|5}
Description
Recalls the state file stored in the specified location of the internal non-volatile memory.
Parameter
Name Type Range Default
{0|1|2|3|4|5} Discrete 0|1|2|3|4|5 None
Remarks

The instrument provides 6 storage locations (No. 0 to 5) in the internal memory for storing the state
files. Sending this command can recall the state file stored in the specified storage location of the
internal non-volatile memory. Select the files from No. 0 to No. 5 to recall the state file stored in the
corresponding storage location respectively.

This command is only valid when an effective state file is found in the specified storage location of the
internal non-volatile memory.

The state file stored includes the dual-channel selected waveform, frequency, amplitude, offset, duty
cycle, symmetry, phase, modulation, sweep, burst parameters, frequency counter parameters, as well
as utility function parameters and system parameters under the Utility menu.
*RST
Syntax
*RST
Description
Restores the instrument to its factory default state.
Remarks

Restores the instrument to its factory default state (please refer to "Factory Setting") and it is not
affected by the :MEMory:STATe:RECall:AUTO command.

This command will stop the sweep or burst in progress in an abnormal way.
*SAV
Syntax
*SAV {0|1|2|3|4|5}
Description
Stores the current instrument state in the specified storage location of the internal non-volatile memory
with the default name.
Parameter
Name Type Range Default
{0|1|2|3|4|5} Discrete 0|1|2|3|4|5 None
Remarks

The internal memory of the instrument provides 6 storage locations (No. 0 to 5) for the instrument
state. The default sate file name is Scpin.RSF. Wherein, n corresponds to the storage location number.

If a file is already found in the specified storage location, this command will store the current
instrument state in the specified storage location to directly overwrite the original file.

For descriptions of the state file, please refer to the "Remarks" under the *RCL command.