RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-14
To Set Noise Signals
Press Noise button, in the Normal Mode, the operation menu will appear at the
bottom of the screen, see Figure 2-21. Set the Pulse parameters by using the
operation menu.
The parameters for Noise waveforms are: Amplitude/ High Level and Offset/ Low
Level. See Figure 2-22. In the operation menu, select Ampl, and the corresponding
amplitude will be displayed in inverse color for which users can make a change for
the amplitude of Noise, which has no frequency or period.
Figure 2-21 Noise Signal Parameter Setting Interface
Figure 2-22 Operation Menu
Table 2-5 Noise Signal Operation Menu
In the Graph Mode, the waveform is shown in Figure 2-23.
Figure 2-23 Waveform Parameter in the Graph Mode
Function
Menu
Settings Explanation
Amplitude/
High Level
Setting the signal’s Amplitude or High Level; the
current parameter will switch at a second press.
Offset/Low
Level
Setting the signal’s Offset or Low Level; the
current parameter will switch at a second press
