7-
Hold the straps with the Car Clips facing towards the
vehicle (Fig 13). Thread the straps up through slot A and
down through slot B of the buckles (Fig 14).
9-
Tighten the straps evenly (Fig 16 and Fig 17) and shut
the vehicle’s doors over the clips/straps (Fig 18).
Fig 18
Fig 17
6-
Line up the side buckles with the doors of the vehicle
(Fig 12). If a 4-door vehicle, (1) strap will attach to the
door frame weather molding in each of the (4) doors. If
a 2-door vehicle, (2) straps will attach to the door frame
weather molding in each of the (2) doors.
1 Year Manufacturer’s Limited Warranty
www.rightlinegear.com/product-warranty.html
5-
Repeat steps 1-3 for the other (3) straps.
Fig 13
8-
Open the vehicle’s doors and hook the Car Clips under
the door frame weather molding (Fig 15).
Fig 16
Fig 15
10-
Tie off the strap ends so they don’t flap in the wind
(Fig 19). Make sure to re-tighten the straps after a few
miles and check them regularly throughout the trip.
Fig 11
Fig 10
Fig 19
Fig 12
Side Buckles
Loop
NOTE: IF A STRAP MAKES NOISE WHILE DRIVING,
LOOSEN THE STRAP, RE-POSITION IT SLIGHTLY,
AND RE-TIGHTEN IT.
Strap End
Fig 14
A
B
Front
Fig 8
Fig 9
Car Clip
Loop
