A
B
E D
C
BOX CONTENTS
Central bracket (1)
Support legs (2)
Extension beams (2)
User guide
PARTS
A Central bracket (1)
B Support legs (2)
C Extension beams (2)
D Locking buttons
E Foot
pads
ASSEMBLING THE BRACKET
1. Slide one support leg into each of the two parallel bracket tracks while holding in both buttons on either side of the parallel bracket tracks.
2. Release locking buttons to lock the support legs in position. You can adjust this positioning when placing the bracket in the window by holding
in the buttons, sliding the support leg to the desired position, and releasing the buttons to lock it into place once again.
3. For further stability, insert the included extension beams into each side of the beam rail while pressing the locking button.
4. Release locking button so that each extension beam sticks out from the outer hole of the beam rail, thus locking it in place at your
desired
length.
PLACE THE BRACKET IN WINDOW
1. Adjust each extension beam until they are able to be positioned securely inside the window (see
fi
gure 2).
2. Press both of the locking buttons at the same time, and slide the leg against the exterior wall to secure it as
fi
rmly as possible. You will want
the bracket to be positioned so that it angles slightly downward (roughly 1/4" to 1/2") toward the outside, so water does not leak into your
window and drains outside. See illustrations below for reference.
3. Ensure that the locking buttons are properly situated in their designated slots.
4. Place air conditioner on the bracket.
PRODUCT SIZE
10" (H) x 19.2" (L) x 20" (W) / 25.4 x 48.8 x 50.8cm - without extension beams
fi
gure 2
fi
gure 3
fi
gure 1
2
